QDEVU® Auto PAM Polymer Dissolved and Dosing Machine

QDEVU® Auto PAM Polymer Dissolved and Dosing Machine

The auto PAM polymer dissolved and dosing machine is designed with advanced technology to provide intelligent control. It is easy to install and use, requiring only a connection to power and water. Additionally, the machine is equipped with an automatic volume increase feature that adjusts based on changes in water flow.

Contact us
Inquiry Basket
OEM:
Available
Sample:
Available
Payment:
T/T,L/C
Place of Origin:
China
Supply Ability:
999 unit per Month

QDEVU polymer automatic dissolving and dosing device is applicable to the preparation and dosing of polymer organic flocculants. It can be fully automatic feeding, dissolution, aging, storage, metering and dosing.

 

WORKING PROCESS

The automatic dosing machine is widely used in the waste water treatment, it can mix the compounds continuously and effectively, so the reactive polymer solution appears.These main components of the machine: Polymer feed machine (including material hopper), Dry powder infiltration device, Tank, Level controller, Mixer, Dosage water inlet pipe, Electric control panel.
  • Polymer Dissolving Device.Polymer dissolving device is composed of pre-soaking device, tank, and 3 sets of mixers. The pre-soaking device is to infiltrate and mix the polymer powder in advance. The 3 tanks are precast mixing tank, homogeneous slaking tank and solution storage tank, in which there is a mixer correspond to guarantee the homogeneity.
  • Polymer Dosing Device.Polymer dosing device is composed of hopper, push screw, electric heater and etc. The effective volume of the hopper can meet the dosage for a long time which is equipped with sight glasses for observing material level monitored by the dry powder level meter. The push screw driven by the high-precision reducer can satisfy the dosage. The electric heater can be installed in the discharge pipe of push screw, and it can prevent the powder from caking.
  • Water Supply Device.Water supply device is composed of pipeline, manual ball valve, filter, pressure gauge, solenoid valve, stop valve, and the rotor flow meter, etc.

 

FEATURE

Polymer automatic foam machine is mainly to dry powder agent as the dominant, using dry powder added.The system is used for automatic continuous of powdery materials  Configuration and feeding system, from powder to configuration  Good solution, the whole process is self-contained  Dynamic, safe and continuous operation. Dry powder from leaking  the bucket enters the mixer and enters after wetting  the mixing tank is diluted to reach the required concentration  the solution. The diluted solution flows through the curing process  Tank, and then into the storage tank. As a storage tank  Liquid level sensor when the solution is at low level.  The liquid level switch signal is triggered to start the device.  The solution preparation process is reconducted and passed.

The controller calculates according to the required solution concentration  to adjust the dosage of powder; The cycle stops when the tank is at a high level, and starts again if the tank is empty. In this way, the system can be continuously running, and the mixer continuously mixing the dry powder.

 

CONTACT US FOR MORE DETAILS ABOUT CHEMICALS DOSER.

If you have specific requirements, contact us about our custom chemicals dosing machine.

 

Contact us

Name

Name can't be empty

* Email

Email can't be empty

Phone

Phone can't be empty

Company

Company can't be empty

* Message

Message can't be empty

Submit